Showing posts with label bruce tricker. Show all posts
Showing posts with label bruce tricker. Show all posts

10 October 2018

Woodworking in Bhutan

Bhutan is a small kingdom at the eastern end of the Himalayas between India and Tibet (China).  We recently spent a week there visiting forts and Buddhist monasteries, hiking through forests and paddy fields and along the way meeting the friendly people who live in this truly beautiful country (and I say that having visited dozens of countries around the world).


Punakha Dzong (Punakha Fort)

There are many unique aspects to Bhutan, one of which is that all buildings must by law be constructed in a traditional style.  This typically includes lots of timber for beams, posts, joinery and furniture.  This has kept a skilled carpentry and joinery workforce alive and well.  


Courtyard inside Punakha Dzong

Monasteries and forts receive the most detail, however even houses and office buildings are constructed with intricate features and wooden joinery. 


A new building under construction in the capital, Thimpu

Timber is harvested from within the country, with the government overseeing felling and re-planting to maintain a minimum forest cover of 60%.  Bhutan is a net carbon sink; it absorbs nearly twice as much carbon dioxide as it produces from industry, transport etc and the main export is hydropower to India.

Trees are milled close to where they are felled, often with portable sawmills - the Australian made Lucas Mill was in evidence in several places we passed through.


Milling of logs in a rice paddy field

After milling, the wood is air dried in stacks by the roadside, usually with a corrugated iron roof to protect it from the rain.


Timber stacked for air drying

Complex joints (with no nails or bolts) are formed with basic tools.  Some large powered machinery was also seen. 


An outdoor joinery shop

Once the joinery is completed the components can be embellished with carving ready for assembly on site.


Relief carving

Monasteries are often high up in the mountains.  Traditionally this would have required much hard labour to haul materials up to the building site although now this is often done with a powered flying fox.  


An extension being added to Chagri Monastery

Bhutan's most famous building, the Tiger's Nest (Paro Taktsang) burnt down in 1998 but was skillfully reconstructed, using traditional methods of course.


Paro Taktsang





29 May 2018

City Gallery

On display in Wellington at the moment (and along with the MONIAC also exhibits from New Zealand's entries in the Venice Biennale) are Michael Parekowhai's On first Looking into Chapman's Homer:



And Michael Stevenson's This is the Trekka:



The MONIAC

I have been wanting to see this machine at the Reserve Bank Museum for several years, since reading about the New Zealand economist and inventor Bill Phillips.  As the only visitors on a cold and rainy Wellington Monday, we were treated to a demonstration of this early computer by a very informative Museum staff member.




Just after the Second World War and around the time the US military commissioned the ENIAC electronic computer (initially for calculating artillery trajectories), Phillips built a computer for assessing and demonstrating the effects of changes in a nation's economy such as interest rates, taxation, government investment and foreign trade.  The difference with Phillips' machine was that rather than using the flow of electrons to calculate complex equations it used the flow of water.

Water is often used as an analogue for electricity when explaining the 'flow' of electrons and the effects of a constriction (a resistor), a one-way valve (a diode) and suchlike but Phillips' machine was literally an analogue (in both senses of the word) computer, where the changes in the levels in transparent containers represented the various changes to metrics in the economy in a continuous (or non-digital) way.  

The device could also demonstrate the time lag between changes in one aspect and another as money flows around the economy.

Phillips built the first MONIAC while he was a student at the London School of Economics.  Copies and replicas of the machine are located at various universities and institutions around the world.




31 March 2018

Next Bus Due: 1978

A 40-year-old bus timetable discovered in our old shed.  Five buses a day serving Orewa, Silverdale, Dairy Flat, Waitoki, Kaukapakapa, Helensville, Parakai, Wharepapa, Woodhill, Waimauku, Huapai, Kumeu and on into Auckland City.

Cost for the approx 70km trip(!) from Dairy Flat into the city: $1.05 or 78c if you buy a 10 trip concession, but adults pay a child fare if they travel off-peak so this would be 30c on a concession if you leave after 9.00am.  From Dairy Flat to the city would have taken approx 1 hour and 40 minutes - not bad considering the circuitous route.




Using the Reserve Bank's inflation calculator, a 30c bus ticket would cost $1.31 today, and the journey on the Northern Express takes about an hour from the Silverdale Station off-peak and costs $6.20 on the HOP card.

So, it's a bit quicker today, more direct, more frequent and nearly five times the cost.





20 February 2018

Recent Projects

Conventional paid work has unfortunately been interfering with my woodworking as of late, but I have been able to make a few things:


Computer standing desk
Lamp 'shade'

Bookshelf


Spice Tray

Also making an appearance in the workshop is a new Festool Kapex mitre saw, which I have installed between two big banks of drawers faced with poplar plywood, recycled jarrah for the handles and a couple of Bunnings acacia panels for the benchtops.


Workshop drawers








18 August 2017

One small step back in time

I was born during the Apollo lunar missions and grew up devouring science fiction from authors like Arthur C Clarke, Robert Heinlein, Larry Niven, Ray Bradbury.  Manned space exploration and even space tourism was just around the corner.

But it was not to be.  Skylab and the space shuttle missions never left low Earth orbit (LEO).  The international space station orbits at an altitude of about 400km, the same distance as a drive from Auckland to Napier.  Nobody has been back to the Moon since 1972.

Lately, there has been a huge resurgence in interest to send manned missions to the Moon and Mars but until then we can look back on the truly amazing achievements of the American space program of the 60's and 70's.

With that in mind, I decided to spend some dark winter evenings building a 1:144 scale kit model of the Saturn V rocket.  There are plenty of blogs out there about assembling the kits so I'll just cover the things that I did slightly differently or stuffed up (for giggles).





This one is made by Revell, and required quite a bit of filler to get things smooth enough for a spray paint finish in my home made spray booth. 


  
I initially tried using a cheap air brush and some thinned Tamiya paint but I gave up and re-coated the main body with a can of white spray paint.

Painting the white was easy, but no amount of care with masking stopped the black Tamiya paint from bleeding through, so again this was abandoned in favor of a can of acrylic.



I used to use an air brush all the time at work (as a part time architectural model maker) but clearly I have lost the knack - too much thinner I think.

For the lunar lander, I wanted to display this along side the rocket for scale so I glued a small rare earth magnet to the underside... 



...and another one under the base.



Note the polarity of the magnet is carefully marked prior to gluing to ensure the lander points the right way when sitting on the base.







13 April 2017

Bench Seats

With the completion of the dining table restoration, covered here previously, our original dining table has been moved outside to the verandah.  It needed a couple of simple bench seats to make the most of the al fresco dining opportunities before it gets too cold.



The table was my first effort at furniture building back in about 1995.  It's made from the old front door of my first house, with some recycled timber for the legs and rails.  Amazingly, it has held together all these years considered the very basic tools and techniques I had as a recent graduate with a student debt and a mortgage.

In keeping with the table, the benches are made from recycled rimu (Dacrydium cupressinum) that I recovered from our last house.  The timber was jointed and thicknessed down to size...



...then cut to length and mortised with my shop made morticing jig. 



This jig is from a design by legendary furniture designer and builder Michael Fortune who recently ran a course at the Centre for Fine Woodworking that I attended.

The mortised legs and top rails have two floating tenons to each joint for a really strong connection.  The design I came up with does not have stretchers, so relies on the glued joints for stability. 



Lengths of floating tenon were thicknessed and then rounded over on the router table to the shape of the mortices.  These were then cut up to length.



For the very simple look I was after, there are no lengthwise rails, so the leg 'A' frames are just glued and screwed to the seat planks.  I made two spacing jigs to help with the assembly.



The seat planks and leg assemblies were then pre-drilled before being glued together.



The screw holes were plugged before the benches got three coats of an outdoor polyurethane.



I think the overall result is a nice clean look, and they will hopefully last at least as long as the table has!






13 March 2017

Great Barrier. No, the other one.

Great Barrier Reef in Australia is a 2300km long coral reef, mostly underwater.  Great Barrier Island is a mountainous 43km long island, a 30-minute flight from Auckland, New Zealand.  Perfect for a few days of self-sufficient tramping.  


Palmers Track

Most Aucklanders have probably not set foot on the island.  The central section has many good tramping tracks and a couple of Department of Conservation huts, including the spectacular one on Mount Heale.


Mt Heale Hut

Mount Hobson is the highest point on the island.  Much of it has been boardwalked to protect the habitat of nesting birds.


Boardwalks and stairs near the summit of Mt Hobson



Summit of Mt Hobson

There are natural hot springs off one of the tracks to soak sore muscles after a few days walking.


Kaitoke Hot Springs








19 February 2017

Old Oval Oak Overhaul

As blogged about previously, I bought an oak extending dining table online last year for $20.




 It had suffered a catastrophic breakdown into many pieces, the majority of which had been carefully kept by the previous owner for a number of years before he passed away.  Most of the joints in the table top had come apart and those that hadn't were on their way to doing so.  Using a hot air gun I separated the remaining hide glued joints.



After initially considering re-jointing all of the boards, I decided that it would be best to just clean up the edges with a wire brush and use a polyurethane glue to put them back together.  The boards have a unique double tongue edge joint but it had been damaged in places.




The polyurethane glue foams while setting, so has the ability to fill gaps to a limited degree.  An MDF former was used to allow even clamping pressure.  Boards were glued back together one at a time to ensure each joint was as flat as possible.



Several of the boards were too warped from years apart in the shed to be glued back together flat.



Relief cuts were made in the underside of the warped boards to allow them to flex enough to be straightened under clamping pressure.



One of the boards had a particularly bad split that needed to be completely re-jointed, meaning the table got slightly shorter and the curve no longer met smoothly. 



This was then re-shaped with chisels and planes...




...until it blended in as well as possible.  Large holes were filled with epoxy.



The turned legs had also suffered the same fate as the table top.  Several of the laminations had come apart and most had been saved in a tin by the previous owner.



These had all warped and so were flattened with a hand plane before being glued back on to the legs.



The middle removable section of the extending table top had been lost, so some new rough sawn American Oak was planed and squared and then resawn into two boards per plank on the bandsaw.


Once planed to the thickness of the fattest part of the original tabletop the new board were ready to be edge jointed together.  The original top varied from 18mm to 21mm thick, so the new central leaf was made 21mm.



The original leaves were held in place with dowels, glued on one side only.  A simple jig was made to transfer the dowel locations from the existing leaf to the new central leaf, and then to re-drill the holes on the remaining leaf to ensure a good fit.


Here is the jig clamped in place.  The end blocks ensure the dowels are in exactly the same location on each leaf.



Standard fluted beech dowels were sanded down on one end to allow the leaves to be pushed together comfortably.  The drill press was used to hold the dowels and a piece of emery cloth sanded the dowels down to an easy push fit.



The winding mechanism for extending the table had been lost and a quick look online revealed a new one would cost at least $400, so instead small blocks were attached to the underside and lengths of threaded rod used to clamp the leaves together.  On one end a nut was rebated into the block and Superglued in place, on the other end a wingnut clamped the leaves together.  Note in the photo a folded piece of paper was used as a spacer to allow the blocks to apply clamping pressure to the leaves once the paper was removed.


The ends of the oval table top still remained the weakest point, cantilevering out about 300mm, with the grain running parallel to the end.  Some oak brackets were made (with slotted holes to allow for wood movement) and fixed to the end rails.  This is not conventional joinery, but gives a little bit of insurance if someone sits on the end of the table.  The brackets were stained to match (a little too dark in this case).



Next, the tabletop was sanded back, with the new central leaf in place.  In the photo, the near leaf has been sanded, removing most of the original dark stain.



After further sanding, scraping and a light application of stain to the new central leaf, a 2lb cut of shellac was mixed up from orange shellac flakes.  Orange because that is the only type I could find, and purple methylated spirits because the local hardware store only sells the dyed variety.  This in effect adds a brown tint to the finish (orange + purple = burnt sienna / brown).

In future I will hunt down de-waxed blonde flakes and un-tinted 'denatured alcohol' as the Americans call it.


The legs were given three coats of shellac using a brush.



The tabletop was finished with a rubber or 'fad' - a wad of cotton wrapped in a linen cloth - about 12 coats in total, applied in figure eights and lubricated with some olive oil.



The finish is definitely not up to 'French polishing' standard - I have to learn the application technique a bit better - but is perfectly adequate for this somewhat rough-around-the-edges table.



Not bad for $20 anyway.